HPD series Grinding Chips Briquetting machine

Retail price

0.0

元

Market price

0.0

元

A large number of mature application of professional-grade grinding slag briquetting treatment equipment, the lowest moisture content of grinding slag after briquetting can be less than 10%；
The German Rexroth high-performance hydraulic power system and professional anti-wear compression chamber technology are used to ensure long service life and dehydration performance；
The maximum processing capacity can reach 200kg/h.

Product serial number：

Category：

Grinding Chips Briquetting

Quantity

Stock:



Product description

The grinding residue produced by the grinding process, whether it is squeezed by a magnetic separator, discharged by a negative pressure filtration system, or blown by a positive pressure filtration system with compressed air, contains a large amount of liquid composition. And because the discharged grinding slag structure is loose, it also takes up a lot of space for stacking, which brings great inconvenience to transportation and temporary storage, and also causes considerable waste of grinding fluid.

Compared with the high energy consumption of compressed air drying, the low efficiency of rubber roller extrusion and the high wear of mechanical screw extrusion, and the liquid content and volume compression rate of grinding residue treated by the above methods are not ideal. The advantages of the Grinding Chips Briquetting Machine with high-performance hydraulic power technology are particularly prominent.

Technical parameters:

Item	Parameter
Processing capacity	60Kg/h - 200Kg/h⁽¹⁾
Water content of discharged material	≤10% ⁽²⁾
Discharge size	Φ90
Working cycle	≤25s
Size	3288mm1510mm1928mm（Maximum shape） 2600mm800mm1700mm（Main machine area）
Weight of the whole machine	≈2000kg
System pressure	25Mpa
Fuel tank volume	200L
Machine power	6.5kW

【Note 1】：In low-pressure (high-speed) mode, approximately equal to 100kg/h chips cake discharge.

【Note 2】：In standard high-pressre mode, using a constant temperature oven at 150℃, three hours after drying using the weight method of measyrement.

The difference before and after using the grinding chips briquetting machine

Grinding chips after draining Grinding chips after dehydration block

loose structure, water content of up to 40%~60%⁽³⁾ Tight structure, water content as low as 6%~8%⁽³⁾

【Note 3】：The data comes from the sampling results of a customer.

Item	Before use⁽⁴⁾	After use
Water content of grinding chips	＞50%	＜10%
Volume density	≈1000kg/m³	≈1400~1700kg/m³
Solid waste discharge⁽⁵⁾	1000kg	500~600kg
Liquid recycling volume⁽⁵⁾	0kg	400~500kg
Manual transportation	Discharge volume is large, and have large volume,need to be removed every shift.	Less discharge, smaller volume, less frequent cleaning and transportation.
Working environment	Liquid dripping, slippery ground	No liquid dripping, clean environment
Economy	Liquid can not be effectively recovered, and solid waste (hazardous waste) is emitted in large quantities.	Recycling of grinding fluid (oil) reduces the amount of solid waste (hazardous waste) discharged.